CA NetQoS NetVoyant Video Best Practices Index - CA Technologies
{{search ? 'Close':'Search'}}

CA NetQoS NetVoyant
Video & Best Practices Index

  • Symposium 2010
  • Videos
  • Best Practices

  • Title/Description View Duration
    Symposium 2010
    Establishing SLAs
    by Eric Hanson, TK, CA|NetQoS
    Previous sessions described how to determine what traffic is consuming resources and how the applications that generate traffic normally perform. In this session, you will learn what is required, recognizing that normal performance doesn't necessarily meet the business' needs. Tracking SLAs enables companies to manage performance with facts and begins to map cost to functionality.
    79.9 MB 48 minutes
    NetVoyant - Custom Device Polling and Reporting
    by Alex Street, TK, CA|NetQoS
    Quite frequently new devices or technologies are deployed into production networks, and it's only after the statistics are needed that the requirements are shared. In this session, you will learn how to leverage the custom polling capabilities of CA|NetQoS NetVoyant to poll these non-standard devices and create meaningful reports on them.
    109.0 MB 60 minutes
    NetVoyant - Expert Alarming and Notifications
    by Susan Ebbert, TK, CA|NetQoS
    In this session, you will learn how to get the most of your NetVoyant system by learning how to configure alarms and notifications. Get the details on how to send email or trap alerts, create an alarm if your devices are deviating from normal behavior, and ensure your team is able to identify and resolve issues before your customers even become aware that there is a problem.
    59.7 MB 35 minutes
    NetVoyant - Incorporating SNMP Polling into Performance Management (CBQOS, IPSLA, NBAR)
    by Robb Van Eman, TK, CA|NetQoS
    There is little argument that IT adoption of best practices from Information Technology Infrastructure Library (ITIL) is increasing. The most recent edition of ITIL, Version 3, expands on its service management heritage but adds much needed guidance on strategy, operations and continuous improvement that were glossed over in Version 2. In this session, you will learn how the network performance management discipline aligns with and underpins the key processes and activities in ITIL, as well as how NetQoS products and services support them. In addition, the relevant differences between ITIL Version 2 and Version 3 will be summarized in a network management context.
    67.4 MB 35 minutes
    Videos
    Webinar: NetVoyant 6.1 Getting Started - Adding Devices - January 2010
    Are you interested in managing devices in NetVoyant more quickly and effectively while closely tracking license compliance? This 75 minute session will discuss the tips and best practices for the NetVoyant discovery process, including how to import devices lists to quickly build discovery scopes, using auto enable rules to allow NetVoyant to automatically enable the components you want to poll, and auditing what has been discovered to ensure that licenses are being used effectively and efficiently.
    53.5 MB 75 minutes

    Webinar: NetVoyant: Events, Alarms, and Notifications - July 2009
    Accumulating lots of data is essential to managing the network for application performance, but disciplined and astute data filtering is required to highlight the information we need to take action on right away and manage by exception. This 50 minute session will provide an in-depth look at how NetVoyant alarms are configured and you will learn how to tune NetVoyant thresholds and alarms to issue the notifications that are critical to delivering optimal application performance.

    Please note: This document applies to NetVoyant versions 6.x
    If you are interested in Notifications for NetVoyant 5.x, please reference the two Best Practice documents Advanced Notifications in NetVoyant or Event Notifications in Netvoyant.

    46.1 MB 53 minutes
    Webinar: Cisco IP SLA Best Practices: Monitoring and Configuration - June 2009
    Cisco IP SLA is a powerful latency monitoring technology that requires no additional devices in your infrastructure. You will learn how to take advantage of IP SLA to view network latency and congestion. The session will provide an overview of all supported IP SLA tests with best practice and deployment scenarios for each one. It will also cover how to configure, deploy and monitor the tests using NetQoS NetVoyant.
    61.2 MB 70 minutes
    Best Practices
    Auto Enable Rules in NetVoyant
    Auto-enable rules let you systematically identify the poll instances that will be automatically enabled when discovered by NetVoyant. These rules minimize administrative overhead so that you do not need to manually enable every poll instance of interest.

    This document explains the auto-enable rules, identifies the more common device properties on which to base auto-enable rules, and provides steps and examples for successful implementation of these rules.
    238 KB (PDF) -
    BGP Peer Status Remote Monitoring
    MPLS (Multiprotocol Label Switching) is becoming a more popular means of transport for remote campuses in enterprise-class organizations. Because most carriers use BGP (Border Gateway Protocol) as the routing protocol, the monitoring of BGP Peer Status is critical for an organization to ensure performance of both the network and applications. This document explains how to understand and configure the monitoring of BGP for Cisco devices by CA NetQoS NetVoyant. However, the underlying mechanism to monitor BGP status using SNMP can be applied to other SNMP monitoring tools, such as CA Spectrum or CA eHealth.
    557 KB (PDF) -
    Creating Email Notifications in NetVoyant 6.0
    NetVoyant is the SNMP polling solution for the NetQoS Performance Center. In version 6.0 and above, a new feature called Alarm Profiles was added. This new feature simplifies the configuration of Alarms, with the added benefits of Alarm Profiles being applied to groups and the ability to configure escalating alarms. This best practice guide is intended to show users how they can create one Alarm Profile so that an alarm is raised in the alarm log and email notifications are sent when an interface goes down and when it comes back up.
    442 KB (PDF) -

    Custom Device Polling
    NetVoyant is the SNMP polling solution for the NetQoS Performance Center. NetVoyant supports many public and private MIBs by default. NetVoyant recognizes most devices on modern networks and is able to poll the majority of the helpful information they offer through SNMP. Also, as manufacturers continue to produce new models, new MIBs are created. One of the many standard features of NetVoyant is the ability to compile new MIBs and build datasets to poll devices that support those MIBs. This allows NetVoyant to poll any device that supports the compiled MIB. This Best Practice document will describe the process and make recommendations about the best manner to do so, while going through the example of polling Power Supply statistics from the Dell PowerEdge Management Utility.

    356 KB (PDF) -
    Get Application Aware with Your Cisco Network Devices
    An important part of shifting a network management strategy from up/down availability measurements to one based on performance is moving beyond a limited, "device-aware" approach to a focus on application delivery - an "application-aware" approach. This entails understanding the content flowing over the links and prioritizing traffic based on the value and importance of that content.

    Some of the most advanced application-aware technologies already exist within Cisco routers and switches and don't require the purchase of additional modules, cards, probes, or proprietary analytical engines. When deployed along with a Simple Network Management Protocol (SNMP) polling product, application-aware technologies such as Cisco IP Service Level Agreement (IP SLA), Cisco Class-Based Quality of Service (CBQoS), and Cisco Network-Based Application Recognition (NBAR) put the data you need right at your fingertips.

    This white paper introduces a set of application-aware capabilities, explains how they can be leveraged within Cisco routers and switches, and outlines their critical role in an overall application delivery management strategy.
    274 KB (PDF) -
    CBQoS Reporting Explained
    NetQoS NetVoyant provides QoS reporting by leveraging information defined in the Class-Based-QoS MIB. This paper describes four types of policies applied to QoS that perform QoS functions:

    • Policing
    • Traffic shaping
    • Weighted Random Early Detect
    • Queuing
    When congestion does occur, these policies aid in Congestion Avoidance and Congestion Management. Reporting is discussed and report examples are presented. A brief discussion regarding monitoring of QoS and ToS is included.
    746 KB (PDF) -
    Cisco IP SLA with NetVoyant
    This document covers the Cisco IP SLA tests that are supported by NetVoyant. It provides a background on how IP SLA tests are performed as well as recommendations on each individual test's ideal deployment. This document also includes information on how to report on IP SLA tests once they are configured. This document holds value for Network Engineers looking for specific deployment and configuration information as well as Managers looking to discover what value IP SLA tests can bring them.
    652 KB (PDF) -
    Advanced Notifications in NetVoyant
    This document describes best practices regarding the creation of Event Notifications for sustained events detected by NetQoS NetVoyant. Advanced alarming based on NetVoyant groups will also be discussed, as well as by-device alarming. This last type of alarming treats all components of a particular type on the same device as one component, applying a total threshold to the entire set of components. Typical usage scenarios involving NetVoyant notifications may include the following:

    • I need an email alert whenever one of my critical devices becomes unavailable
    • I need trouble-ticket traps whenever utilization thresholds are exceeded
    • I need email alerts whenever status-code conditions are met
    • I want an email alert whenever my servers have high utilization for 30 minutes
    • I need an email alert anytime there is high inbound utilization on my WAN interfaces for 10 minutes during business hours
    Please note: This document only applies to NetVoyant versions 5.x and below. If you are interested in Notifications for NetVoyant 6.x, please reference Webinar: Events, Alarms, Notifications.
    874 KB (PDF) -

    Chat with CA

    Just give us some brief information and we'll connect you to the right CA Expert.

    Our hours of availability are 8AM - 5PM CST.

    All Fields Required

    connecting

    We're matching your request.

    Unfortunately, we can't connect you to an agent. If you are not automatically redirected please click here.

    • {{message.agentProfile.name}} will be helping you today.

      View Profile


    • Transfered to {{message.agentProfile.name}}

      {{message.agentProfile.name}} joined the conversation

      {{message.agentProfile.name}} left the conversation

    • Your chat with {{$storage.chatSession.messages[$index - 1].agentProfile.name}} has ended.
      Thank you for your interest in CA.


      How Did We Do?
      Let us know how we did so that we can maintain a quality experience.

      Take Our Survey >

      Rate Your Chat Experience.

      {{chat.statusMsg}}

    agent is typing