Why am I getting and ABEND- IMS 0476?

Document ID:  TEC1680495
Last Modified Date:  07/11/2017
{{active ? 'Hide' : 'Show'}} Technical Document Details

Products

  • CA File Master Plus for IMS

Releases

  • CA File Master Plus for IMS:Release:10.0

Components

  • FILE MASTER FOR IMS:FMIMS
Introduction:

Getting an IMS 0476 abend running File Master Plus for IMS

Question:

Why am I getting and ABEND- IMS 0476?

Environment:
ADFMIM00200-10.0-File Master Plus-for IMS IMS VERSION 13.1 We are using BMP only
Answer:

       PCB     TYPE=TP,LTERM=XDRDDCDT,ALTRESP=NO,SAMETRM=NO,MODIFY=NO, C 

               EXPRESS=NO                                               

       PCB     TYPE=DB,DBDNAME=LDRCDT1D,PROCOPT=AP,KEYLEN=29,          C 

               PCBNAME=PCB10,LIST=YES                                   

       SENSEG  NAME=RDRCDT10,PARENT=0                               

       SENSEG  NAME=RDRCDT20,PARENT=RDRCDT10                            

       SENSEG  NAME=RDRCDT22,PARENT=RDRCDT10                            

       SENSEG  NAME=RDRCDT31,PARENT=RDRCDT22                            

       SENSEG  NAME=RDRCDT24,PARENT=RDRCDT10                            

       SENSEG  NAME=RDRCDT34,PARENT=RDRCDT24                             

       SENSEG  NAME=RDRCDT25,PARENT=RDRCDT10                            

       SENSEG  NAME=RDRCDT26,PARENT=RDRCDT10                            

       SENSEG  NAME=RDRCDT28,PARENT=RDRCDT10                            

       PSBGEN  PSBNAME=DRDNDCDT,LANG=PL/I,CMPAT=YES                     

       END        

What could be the cause of the 0476 abend is perhaps LANG=PL/I in the PSBGEN call. The PCB address gets passed differently if LANG=PL/I. Try to remove that parameter or specify LANG=COBOL. 

One other remark is about the CMPAT=YES setting in that same PSBGEN call. 

 

That parameter is supposed to create a TP PCB under the covers for compatibility with online programs. Either change the CMPAT parameter or try to remove the TP PCB from the PSB. Best regards and good luck,                                                   

 

 

 

Please help us improve!

Will this information enable you to resolve your issue?

Please tell us what we can do better.

{{feedbackText.length ? feedbackText.length : '0'}}/255

{{status}}

Not what you were looking for?

Search Again >

Product Information

Support by Product >

Communities

Join a Community >

Chat with CA

Just give us some brief information and we'll connect you to the right CA ExpertCA sales representative.

Our hours of availability are 8AM - 5PM CST.

All Fields Required

connecting

We're matching your request.

Unfortunately, we can't connect you to an agent. If you are not automatically redirected please click here.

  • {{message.agentProfile.name}} will be helping you today.

    View Profile


  • Transfered to {{message.agentProfile.name}}

    {{message.agentProfile.name}} joined the conversation

    {{message.agentProfile.name}} left the conversation

  • Your chat with {{$storage.chatSession.messages[$index - 1].agentProfile.name}} has ended.
    Thank you for your interest in CA.


    Rate Your Chat Experience.

    {{chat.statusMsg}}

agent is typing